The Mic Mute footswitch is our answer to customer requests who like the idea of the Optogate devices but have different applications where a manual foot switch is the better solution.
The Mic Mute is a phantom powered footswitch what can switch on or off condenser mics and dynamic mics without any switching noise. A status led will indicate the "Mute" position. The foot button can be used as "Push To Talk" or "Mic On / Off". The switch mode can be changed with a dip switch.
Physical dimensions:
|
95mm length x 42mm height x 62mm width
|
Connectors:
|
XLR 3-pin (1 = gnd, 2 = plus, 3 = minus)
|
Case construction:
|
2mm steel, black powdercoated
|
Switching noise:
|
Immeasurable
|
Frequency response:
|
0 Hz - 30kHz, - 3 dB in connection with 150 Ohm microphone impedance
|
Signal noise ratio:
|
-114 dB / -122 dB, Mic on / off with 150 Ohm Mic.
|
Distortion:
|
< 0,05 % with 100mV signal
|
Attenuation "mic on":
|
0 dB
|
Attenuation "mic off":
|
42 dB in connection with 150 Ohm microphone impedance
|
Usuable mic. types:
|
All type of dynamic - and phantom powered mics. up to 10 mA current consumption
|
Maximum input level:
|
3 dBu (1.1V)
|
Operating temperature:
|
0 - 60 degrees Celsius
|
Power:
|
18 - 48 V Phantompower (passes phantompower to the microphone)
|
Current consumption:
|
Ca. 3 mA
|