The Mic Mute footswitch is our answer to customer requests who like the idea of the Optogate devices but have different applications where a manual foot switch is the better solution.
The Mic Mute is a phantom powered footswitch what can switch on or off condenser mics and dynamic mics without any switching noise. A status led will indicate the "Mute" position. The foot button can be used as "Push To Talk" or "Mic On / Off". The switch mode can be changed with a dip switch.
|
Physical dimensions: |
95mm length x 42mm height x 62mm width |
|
Connectors: |
XLR 3-pin (1 = gnd, 2 = plus, 3 = minus) |
|
Case construction: |
2mm steel, black powdercoated |
|
Switching noise: |
Immeasurable |
|
Frequency response: |
0 Hz - 30kHz, - 3 dB in connection with 150 Ohm microphone impedance |
|
Signal noise ratio: |
-114 dB / -122 dB, Mic on / off with 150 Ohm Mic. |
|
Distortion: |
< 0,05 % with 100mV signal |
|
Attenuation "mic on": |
0 dB |
|
Attenuation "mic off": |
42 dB in connection with 150 Ohm microphone impedance |
|
Usuable mic. types: |
All type of dynamic - and phantom powered mics. up to 10 mA current consumption |
|
Maximum input level: |
3 dBu (1.1V) |
|
Operating temperature: |
0 - 60 degrees Celsius |
|
Power: |
18 - 48 V Phantompower (passes phantompower to the microphone) |
|
Current consumption: |
Ca. 3 mA |
This product was added to our catalog on Tuesday 26 November, 2019.
