The PB-05 E is an economic version in a plastic housing and with a 270 degree trimpot for the distance adjustment. The PB-05 E is plugged between microphone and cable. It's equipped with an infrared sensor. The PB-05 E senses if someone is in front of the microphone and will switch on the microphone. The distance can be adjusted between 15 cm and 100 cm with the help of a Trim Pot. The microphone will be switched off automatically if nobody is in front of it. A red status LED indicates if the microphone is switched on. The PB-05 E works with 48 Volt phantom power. The PB-05 E is ideal for lead and backing voval mics, acoustical instruments and talk back mics. The PB-05 E ist the best and easiest solution for the most common problems in live applications. It eleminates unwanted backgound noise of other instruments into unused microphones on stage. So, the clarity of the mix and the dynamics will be increased due to less phase cancellation and backgound noise. It reduces the possibility of feedback from unused mics.
- Turns off your mic automatically via infrared when you are not using it!
- No false audio triggers!
- Set the distance and go!
- Eliminate unwanted sound from going to your mix, monitors, and mains!
- Excellent for in-ear monitors and very loud stage environments!
- Your sound will be better than EVER before!
- Your amps will sound better!
- Your ears and your Audiences will thank you! You will not be able to live without it anymore...
Manual (PDF)
| Size PB-05 E: |
69 mm x 35 mm x 21 mm |
| Connectors: |
XLR 3-pin (1 = gnd, 2 = plus, 3 = minus) |
| Case construction: |
ABS plastic, black |
| Distance |
Adjustable between 15 - 100 cm (depending of the type of reflection surface) |
| Angle |
+ / - 10 degrees |
| Switching noise: |
Immeasurable |
| Frequency responses |
0 Hz - 30kHz, - 3 dB at 150 Ohm Microfonimpedanz |
| Signal noise ratio: |
-114 dB / -122 dB, Mic on / off, 150 Ohm Mic. |
| Distortion |
< 0,05 % with 100mV signal |
| Delaytime mic on: |
< 0,2 Sec |
| Delaytime mic off: |
ca. 1 Sec |
| Attenuation "mic on": |
0 dB |
| Attenuation "mic off": |
- 42 dB in connection with 150 Ohm mics
|
| Nutzbare Mikrofontypen: |
All type of dynamic - and phantom powered mics up to 10 mA current consumption |
| Maximum input level: |
3 dB (1,1V) |
| Operating temperature: |
0 - 55 degrees Celsius |
| Background light range: |
0 - 20000 Lux daylight and 0 - 12000 Lux electric bulblight |
| Power: |
24-48 V Phantompower, ca. 5 mA |
