Optogate Mic Lift - Motorized mic stand adapter

The MIC LIFT motorized adapter solves one of the most common problems in conference applications. It can be mounted on a mic stand and gives the engineer the advantage to change the height of a mic stand without leaving his FOH place. 2 small electric motors with rubberwheels make the transfer to the central bar of the mic stand.

Applications:

The MIC LIFT is the best solution for conference and house of worship applications. It is very easy to mount the MIC LIFT adapter on almost every kind of microphone stand. Just Plug & Play...

The Mic Lift adapters are made for K&M mic stands. Distance plates for other manufactures are available on request.

Physical dimensions:	60mm width x 120mm height x 92mm depth, without cable guide
Connectors:	XLR 3-pin for rc and 2,5mm supply connector
Case construction:	Aircraft-aluminium, ST37 steal
Weight:	about 1,2 kg
Motor noise:	+44 dB (A) / 1m distance when motors working
Remote control type:	passive rc with 2m cable and 3 pin xlr connector. It can be extended with any normal mic cable.
Maximum cable distance:	ca. 150m, depending of the quality of the cable.
Operating temperature:	0 - 65 degrees Celsius
Power:	9 - 12 V with 8 internal batteries, type AA or 12 V powersupply with 2,5mm adapter
Current consumption:	Ca. 1 A when motors working, 8 mA standby