230V Power Line Guard

Do you have expensive quipment that needs to be protected from overvoltages? The Overvolt Protection Unit "Powerline Guard" is the solution. This small box is connected to the mains while your equipemtn is connected to the Schuko socket. In the case of overvoltages the box will switch off immediately (< 0,02 sec) the 230V from the schuko socket and an implemented piezo beeper will beep "SOS" as long as overvoltage is present. The Schuko socket will be switched on automatically when the mains line voltage is ok again. The trigger voltage range is adjustable with a small trim pot. A temperature switch switches off the Powerline Guard completely after about 4 minutes when overvoltage above 400 Volt are present for a longer time.

Specifications:

Physical dimensions:
120mm length x 78mm height x 65mm width
Case construction:
1 mm Iron, black powdercoated
Trigger voltage:
Adjustable between 150 and 280V
Switch hysteresis:
+ / - 2V
Connectors:
Schuko socket for output
Max. Reaction Time:
24ms
Maximum Current:
5 Ampere -> 1150 Watt
Max. Operation Temp.:
+ 70 degree Celsius
Survival time on 400 Line:
> 4 Minutes
back

 

Axel Joost Elektronik

Selsinger Str. 28, 27404 Rhade, Germany Ph: +49 4285 95156Fax: +49 4285 95157 Em: info@optogate.com
Copyright © 2005-8 All Rights Reserved. Impressum
´
(c)
(c)